there is no issues with humidity

Nooope

Nope

Seems like everyone shouts dry your filament when they have no clue whats going on. This is just a very hard print with a not perfectly calibrated printer. Has nothing to do with filament humidity. Nothing at all. Calibrate & fine tune the printer. The printing communities feedback/advice is getting progressively worse while printing gets more accessible year for year.

Is this considered content now? 20 min im never getting back. Just empty babbeling and more rambling.

This is just plainly wrong

Freedom soap and alot of hot water is all you need. If thats not enough and you havent invaded the bed in weird ways before its probably bad Start code or user error.

Its PEI, powder coated. Everything should stick to it with out any adhesives. Soap?

I habe never used mek, but acetone on abs. Works like a charm.

either have something like KAMP handle your meshing adaptively before every print (takes more time every print, will work even with different bed);

or by having a fixed bed without any adjustable screws/etc., creating a proper bed_mesh (eg bicubic with an amount of probe_count on the higher side) and loading it in your print_start before every print. (will always work aslong as the bed/setup stays the same. Gotta remesh when you change beds)

Klipper with proper mesh and a reliable Probe on a fixed bed can handle 1mm range without any issues at all.

Quality content

Extruder Rotation distance? Slicer flow? Extruder arm tension? No physical clog?

This opinion is unacceptable

Same issue here Shit does indeed not work

Simply let someone reprint that part for you in ASA/ABS?

You can buy new mouse skates for 2 bucks on aliexpress

Fusion360

If you open your mind a little it is kinda an answer :)

deleted by creator